The MOTM standard LED (Lumex SSI-LXH387ID, the red one, for example)
takes a 5/16" panel hole. Bill and Will
--- In ModularSynthPanels@yahoogroups.com, "adaaxs" <wonggster@...> wrote:
>
>
> What size bit do you use to make a proper led hole ?
>
>
> >
> > As promised, about the Tau Pipe LED issue - Jurgen confirmed that you
> > really do need 2 LEDs and that the bi-color one won't work (by now a
> > foregone colclusion, we know). Will wants to drill an extra LED hole
> > so we can preserve the original intent of Jurgen's design - so we'll
> > do that above the one that's already there and put a green one there.
> > Sorry for the mixup. Bill and Will
> >
> >
> >
> > --- In ModularSynthPanels@yahoogroups.com, "wjhall11" <wjhall@> wrote:
> > >
> > > Oh jeeze - we haven't gotten that far - our Tau Pipe construction
> > > stalled (moving our MOTM construction operation to new digs). So
> > > we're clueless too. (how embarrassing - well not really - we're
such
> > > complete idiots, after all) For that matter, there is call for two
> > > such LEDs on the Jurgen's FS1A we're beginning to develop a
MOTM-style
> > > panel for. Help? Bill and Will
> > >
> > >
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, loopcycle <loopcycle@>
> > > wrote:
> > > >
> > > > at the risk of coming off as a complete idiot here...how do i wire
> > > the led?
> > > > i got the red/green flat lumex led which has two leads per
> > > bill&will's bom.
> > > > but the up/down is on the pcb separately. can someone help me
with
> > > wiring?
> > > > (i expected the led to have three leads, honestly. i dunno?)
> > > > thanks.
> > > >
> > > >
> > > >
> > >
> >
____________________________________________________________________________________
> > > > Be a better friend, newshound, and
> > > > know-it-all with Yahoo! Mobile. Try it now.
> > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > > >
> > >
> >
>