What size bit do you use to make a proper led hole ?
>
> As promised, about the Tau Pipe LED issue - Jurgen confirmed that you
> really do need 2 LEDs and that the bi-color one won't work (by now a
> foregone colclusion, we know). Will wants to drill an extra LED hole
> so we can preserve the original intent of Jurgen's design - so we'll
> do that above the one that's already there and put a green one there.
> Sorry for the mixup. Bill and Will
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, "wjhall11" <wjhall@> wrote:
> >
> > Oh jeeze - we haven't gotten that far - our Tau Pipe construction
> > stalled (moving our MOTM construction operation to new digs). So
> > we're clueless too. (how embarrassing - well not really - we're such
> > complete idiots, after all) For that matter, there is call for two
> > such LEDs on the Jurgen's FS1A we're beginning to develop a MOTM-style
> > panel for. Help? Bill and Will
> >
> >
> >
> > --- In ModularSynthPanels@yahoogroups.com, loopcycle <loopcycle@>
> > wrote:
> > >
> > > at the risk of coming off as a complete idiot here...how do i wire
> > the led?
> > > i got the red/green flat lumex led which has two leads per
> > bill&will's bom.
> > > but the up/down is on the pcb separately. can someone help me with
> > wiring?
> > > (i expected the led to have three leads, honestly. i dunno?)
> > > thanks.
> > >
> > >
> > >
> >
> ____________________________________________________________________________________
> > > Be a better friend, newshound, and
> > > know-it-all with Yahoo! Mobile. Try it now.
> > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > >
> >
>