not a problem whatsoever, bill.
i got the beast running tonight. one led works just fine.
thanks for putting that BOM together! you made it infinitely easier for us =)
hans
--- William J Hall <
wjhall@...> wrote:
> Hey - Loop
>
> I'm so sorry about the mix-up. I was certain Will and I had cleared
> this with Jurgen, and I have email in to him about it. I guess, if it
> turns out that the 2 lead LED really doesn't work, we'll use just a red
> one too. Again - sorry about this. If Jurgen says the two-lead LED
> won't work, we'll correct our BOM (of course).
>
> When I hear back from Jurgen I'll post to the forum-at-large.
>
> But it also seems clear that he's using a dual-color two-lead LED in his
> FS1A gadget.
>
> <sigh> Bill
>
>
>
>
>
> loopcycle wrote:
> >
> > okee dokey, thanks!
> >
> > (btw, anyone finished theirs yet?)
> >
> > --- Scott Deyo <contact@...
> > <mailto:contact%40bridechamber.com>> wrote:
> >
> > > Yes, that's the concensus -- a three-wire LED or two LEDs.
> > >
> > > I know I'm a bit daft 'n' all that, but do you really need a green LED
> > > to tell you that the red LED is off?
> > > ; p
> > >
> > > But there's plenty of panel space for a green one if you need it, want
> > > it, gotta have it -- blinky lights are one of the best parts of a
> > > modular.
> > > Because, after mocking like I did... I'll use a three-wire, or drill a
> > > hole for the green LED!
> > >
> > > Cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@... <mailto:contact%40bridechamber.com>
> > > http://www.bridechamber.com <http://www.bridechamber.com>
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com <http://www.jealousedison.com>
> > >
> > >
> > > On May 5, 2008, at 7:29 PM, Mark wrote:
> > >
> > > > On 5/5/08, loopcycle put forth:
> > > > >at the risk of coming off as a complete idiot here...how do i wire
> > > > the led?
> > > > >i got the red/green flat lumex led which has two leads per
> > > > bill&will's bom.
> > > > >but the up/down is on the pcb separately. can someone help me with
> > > > wiring?
> > > > >(i expected the led to have three leads, honestly. i dunno?)
> > > > >thanks.
> > > >
> > > > Not that I'm there yet, but from looking at the schematic, and from I
> > > > think I remember JH said on the electro-music forum, you can't use a
> > > > two-wire led such as the red/green flat fresnel Lumex used by MOTM.
> > > > You need either a three-wire led or two separate leds.
> > > >
> > > >
> > > >
> >
> > __________________________________________________________
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile. Try it now.
> > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > <http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ>
> >
> >
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ