Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [ModularSynthPanels] Re: CGS65 Questions....

From: "mcb, inc." <mcbinc@...>
Date: 2008-03-29

I've uploaded a small image showing how I wired the SPDT switch
to control bias to two grids. In case it isn't clear, the
'top' end of the resistor is wired to the pole of the switch
and to the common point of the two on-board jumpers.

--
Monty Brandenberg