Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [ModularSynthPanels] sn voice and 'bug proposed designs

From: "krisp" <krisp14u@...>
Date: 2008-03-14

Hi Scott and all
That's almost the same as the panels I had made by Schaeffer picture in the files somewhere  
I used on-on-on switches to get the 50%, EG and LFO on one switch also used one of them on the LFO rate switch
 
 
also I think the you should have the pots in this order
 
Rate
Rate CV
Cluster
 
 down the left hand side as they are in that order on the PCB for easy mounting to the panel
 
 
Cheers
 
Paul Darlow
 
 
 
 
----- Original Message -----
From: Scott Deyo
To: ModularSynthPanels@yahoogroups.com
Sent: Friday, March 14, 2008 3:15 PM
Subject: [ModularSynthPanels] sn voice and 'bug proposed designs

Hello Group,

I have proposed designs in the files section, under Bridechamber Proposed Designs.

There is a 3U SN Voice and a 2U Wogglebug.
Both are standard, no-mod designs.

The only thing on the SN voice is we will use a toggle for the range. Center off will leave
one cap connected, up will connect a big cap in parallel, and down will connect a medium
cap in parallel. Much easier and less expensive than a rotary.
Also, I used a switch to choose between LFO and EG PWM and left off the fixed. Is OK or
should be try to jam a rotary in there? Or an attenuator? It will get cramped...

I haven't heard much about the 'Bug -- some want dual 'Bugs w/ Child Tone outputs, but
this would make it 4U. I can do that, but I need to know what people want.

Cheers,
Scott