Pishock, Jimmy wrote:
> This question was probably asked only about a million times; however, I'm
> going to raise it again: "How much would it cost to have a flight case made
> for the Mellotron-- worthy of air travel." Are there certain things one
> should disengage when flying a Mellotron (remove the keyboard, remove frozen
> human torso from inside cabinet, etc.)?
>
> Jimmy Pishock
>
> __________________________________________________________________
Hi Jimmy, Newton's law of gravity is a strong one to consider when transporting 'Trons.From
others' opinions/advice I 've done this in the past:
1) Slacken the drive belt from flywheel.
2) Reinforce assembly under motor/flywheel end with shim block to restrict any possible
movement.
3) Place corrugated bits between each end of keyboard and headblock to prevent lateral
movement of headblock.
4) I personally used cable-ties to secure the track-selector pin and I removed the keyboard
entirely. The heavier the instrument,easier the shock tends to distribute thru the innards.
F=m∗a .
5) Allow the torso to acclamate to room temperature before utilising a Sawzall to extricate
stubborn body parts.
Professional advice from those who build and service Mellotrons is gratefully welcomed here.
Cheers, "Shallow Hal"