Hi all!
Thanks for putting this up, Ken. I've been looking for something like
this for my own website. I've now included a link.
If anyone is interested, after having a lot of requests from the hordes
of the unwashed (mellotronistically speaking), as to what these darn
things sound like, I've also put up an MP3 of a band I used to play
with in the mid-70s (Devotion). It's from a demo we did in '74, and
while it is entirely atypical from the band's usual repertoire (I mean,
we're talking light years away!), it does have some very nice mellotron
on it, if I do say so myself. See if you can find the mellotron flute
among the real ones. There's also 3 violins and mixed choir. This is
indeed my SFX console (I've had it almost 30 YEARS?!!). We traded my
original 400 for a drummer we really coveted whom another Toronto band
had at the time. That band eventually turned into Saga, so he probably
got the short end of the stick... Check out
http://rickblechta.com and
look for "Mellotrons" under the music tab in the top navigation bar.
As for rounding off the pinch rollers (Martinizing), I have to say that
it does work a treat. I did it after the mishap at Tronto MkII and
haven't had any further trouble -- although I never pressed keys down
anything but straight which probably accounts for the problem not
arising before MkII. And that's an important point that usually isn't
discussed. If you want the very best sound and even tracking, your
playing technique must be such that you depress the keys straight down.
There is enough play between them (and they have been known to warp,
too), so that the pressure from the pinch roller and pressure pad can
become rather uneven. Have trouble with fidelity on the outside tracks?
This could be the reason.
I, too, can attest to the stability of the Streetly motor control card.
My mellotron has never been more stable. And it went in easier than you
can imagine -- mainly because it was JB himself who put it in at Tronto
MkII. I merely had to bring him tea when he asked. So civilized, these
Brits...
Rick
On Thursday, October 16, 2003, at 02:01 PM, kenmerb@... wrote:
> OK, I've been waiting for a good time to show everyone something I
> found on the internet, so here it is. It's a demonstration of the
> operation of a single note of a mellotron, complete with moving
> graphics and sound. And it's interactive. Just click on the
> mellotron key to play the note, and you'll see what happens
> mechanically inside a mellotron to make the sound play. Here's the
> link:
>
> http://www.keyboardmuseum.org/v_teach/mellotron.html
>
> Most of you probably know how this works, but it is a good visual.
>
> And, in case someone asks what's to gain by "rounding" the edges of
> your pinch rollers, this will help show you. By rounding the edges,
> the rollers tend to drive the tape in a straighter path, reducing the
> chance that it will go off to the side and wrap around the roller, as
> happened to Rick's SFX machine at 'Tronto II (hi Frank ;-). This is
> usually only done on pinch rollers that have gone hard and are
> somewhat concave, causing the problem. If yours are like that, or if
> you've had trouble with tape wrapping around the pinch rollers,
> rounding the edges could be a solution.