On Wed, 10 Sep 2003, chmorris2000 wrote:
> What type of reverb seems to be most effective when
> recording 'trons? I'm looking to buy a new unit and wanted to know
> what you guys thought on the matter.
> Craig
to state the obvious, differnt reverb types have different character.
a spring sounds VERY different from a plate.
and the desired effect/context determines the proper tool.
i prefer a digital unit 'cuz i can emulate [quite well in most instances]
just about any reverb type with a couple of knob twiddles. [and humping an
old EMT plate around is almost as much fun as hauling a tron around...]
my own preference is anything from lexicon.
it's what they [lexicon] do best, and there is good reason that just
about every decent studio in the world uses them.
if you can get or use a lexicon 480 or 960 then by all means do!
[they cost thousands however]
otherwise, thier smaller units are also quite useable.
a lexicon "hall" reverb does magic for the sound of even a badly
maintained tron.
one key thing to listen for in a digital reverb is the "tails"
- the trailing sound as it fades away... cheap/crappy units with
wonky algorhythms start to sound pretty squirrely/cheesy on the tails...
NOTE: the opinions expressed herein are mine.
if you don't like them then get your own ;)
...jeff