> 1) What is this product and where to get it
> "self adhesive film "
It's thin 11" X 8.5" sheets of self-adhesive plastic film. You can
get them for laser printers and copiers or for inkjet printers. Print
on the sheet like paper, spray a protective coating over it if
necessary, cut then peel off the backing and apply. Bought mine
(opaque white for laser) several years ago from a place called Pearl
Paint but they no longer stock it. A Froogle search indicates a place
called Mister Art having it in stock. Here is a link for laser ready
products, they should also sell inkjet ready equivalents;
http://www.misterart.com/store/view.cfm?store=001&group_id=3700 > 2) I notice this is a servo control being built, can you share some
> details about this? The reason I ask is that I am about to convert
> a machine over to CNC using servos. I have not yet purchased the
> servo drivers yet, so I am curious.
A simple plug-n-play setup using drivers from here;
http://www.cadcamcadcam.com/index.asp?PageAction=VIEWPROD&ProdID=11Before getting the above I also bought and evaluated one of these
which just about everyone seems to use and recommend;
http://www.geckodrive.com/item.htbml?order_id=0&item_id=G320--- In
Homebrew_PCBs@yahoogroups.com, "lcdpublishing"
<lcdpublishing@y...> wrote:
> Hi Derek,
>
> Great pictorial! I have two questions...
>
> 1) What is this product and where to get it
> "self adhesive film "
>
> 2) I notice this is a servo control being built, can you share some
> details about this? The reason I ask is that I am about to convert
> a machine over to CNC using servos. I have not yet purchased the
> servo drivers yet, so I am curious.
>
> Chris
>
>
>
>
>
>
>
> -- In Homebrew_PCBs@yahoogroups.com, "derekhawkins"
> <derekhawkins@y...> wrote:
> > Most of us are probably using CAD software to design our PCBs but
> if
> > you're still scribing patterns for drilling and cutouts directly
> > to metal during case construction then you should consider
> creating
> > CAD templates, printing and pasting them to the metal instead.
> Even
> > if you don't intend using a CNC setup, these templates make things
> > more accurate for component placement and allow for efficient
> > repeatability in case of screw ups. Also, the same template can
be
> > used as the basis for a dimensionally accurate "decorative"
> > finish.
> >
> > Freeware PCB CAD software abounds and while they may be
> intentionally
> > limited when it comes to actual PCB design, generally, there is
no
> > limitation when used for something like case design if you choose
> the
> > right one. In other words, provided devices such as pads
> and "known"
> > components are not being used, your design can be any size.
> >
> > The link below is a set of pictures demonstrating the use of CAD
> > software and printed templates to CNC drill and center drill
> > (equivalent to center punching but under CNC) a 12" X 6"
> > sheet of aluminum that becomes the front, back and base of the
> case.
> > Holes over 1/8" were drilled manually after center drilling.
> > Cutouts were nibbled using templates as bounds. Finally, a
> decorative
> > finish printed on self adhesive film was then used for the front
> and
> > back.
> >
> > http://www.pbase.com/eldata/caseconc