Ooops, I see now you've already discussed this idea.
One note, if you have the shopvac higher relative to the drill, you can use
gravity to move the water, no pump required. Control the downflow of water
with a ball valve.
I would also make sure the DIY outlet on the side of the shopvac is below
the waterline, to keep floating dust in the shopvac.
I'm sure there's a way of using a shopvac without any fancy modifications.
Robert
:)
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de Robert Hedan
Envoyé : juillet 24 2005 15:13
À :
Homebrew_PCBs@yahoogroups.comObjet : RE : [Homebrew_PCBs] Re: what if - drilling under water
Simple, use the water along with a water-type shopvac (I think they all
are).
The water stops dirt particles from going airborn, and the shopvac stops the
water from going anywhere.
Robert
:)
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links