It's probably not useable, at least by conventional drill bits. It would
probably be limited to the smallest dental burrs or whatever they are
called. My handpieces are packed away or may still be at my Canberra house,
so it may take some time to find them. As somebody else pointed out,
mounting the handpiece will be problematic - and I hadn't even thought of
possible problems with the bearings.
Bill
----- Original Message -----
From: "Stefan Trethan" <stefan_trethan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Friday, July 15, 2005 3:01 PM
Subject: Re: [Homebrew_PCBs] PCB drill recommendations
> On Fri, 15 Jul 2005 01:53:05 +0200, Bill Maxwell <wrmaxwell@...>
> wrote:
>
>> or an old dental pneumatic drill? I have several of those handpieces,
>> somewhere.
>> Bill
>
>
> not sure if the chuck is useable.
> You want to try?
>
> ST
>
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>