> Yea i have seen the schem. and you can feed it with a wall-wart.
> You need about 17V or more of DC on the 7815 input for it to work
> properly, how you get that doesn't matter.
> In case you get a wall-wart with regulated output of 15V you can
hook the
> 7805 to that and connect without the 7815 to 15V.
>
> You know this is getting pretty off topic, there is another group,
> Electronics_101@yahoogroups.com, where most of the people here are
also
> around and where it is much more on topic.
>
> ST
Thanks for the info, I'll check that group out for more technical
questions. To get back on the topic of board design...
In my previous post, I listed the link for the PDF board files (in
addition to the schem). Is there an easy way to convert this to an
eagle file? This was the reason I first posted, as I have to redraw
the schematic to a board and couldn't find american versions of the
two listed parts. If I could convert the pdf to a board, half of my
problem would be solved. Then I could ask the other forum about
electronic part suggestions.
GC