Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] European Components for PCB's

From: "Stefan Trethan" <stefan_trethan@...>
Date: 2005-07-08

On Fri, 08 Jul 2005 00:30:06 +0200, Greg Codori <greg_codori@...>
wrote:

>
> http://www.elfa.se/pdf/71/07104979.pdf
> bc337b - Philips general purpose transistor
> elfa #71-072-46
> $0.21 EU
> http://www.vishay.com/docs/88501/1500z.pdf
> b40c1500r - 1.5a bridge rectifier
> elfa#70-050-93
> $1.08 EU


Those are standard parts, you will have no troble finding a US equiv.

The BC337 should be available in the US as is, but a close match will do
fine. look at the cct. if there are any extraordinary requirements, but i
say about half of the transistors you can buy will work ;-)


A bridge rectifier is also a standard part, look for the right footprint
if you have a PCB and use the same or more current and voltage rating.


I would be prepared to send you parts in exchange for paypal, if they
really were anything you couldn't get or substitute, but it isn't required
in this case.


ST