Hi Brian, if at the hardware store, look for "Pop" rivets which are a
blind rivet system - Pretty cheap, easy to work with too.
--- In
Homebrew_PCBs@yahoogroups.com, "Brian Chapman"
<cornbeltroute@m...> wrote:
> > Bend two pieces of aluminum to a C shape, the one piece forms top
> and sides, the other piece forms bottom and front/back. <
>
> This was one of the three methods the author suggests for building an
> enclosure. Thought it would require a bending brake, though, to make
> it fit together fairly well?
>
> > I'd prefer screws and rivets. Don't try brazing/welding aluminum
> unless you have a tig welder. -ST <
>
> Screws/rivets it is, then. Thanks for the help, ST. Appreciate it.
>
> Brian Chapman
> Evansdale, Iowa
>
>
> ---