"Most machine tools using ball screws go so far as to even put two
nuts on with a tab between them to further eliminate backlash to
near zero (usually .0002" or less)."
That's exactly what I am doing to reduce the inherent
slop in ordinary long screws & nuts; 1/2" 13-TPI.
Robert
:)
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links