I've done what I believe are improvements to the 12V stepper motor driver
schematic I had in the Photo section. It's no longer there, I moved it to
the CNC folder of the Files section.
I've added opto-couplers between the CMOS chips and the transistors, lowered
the CMOS voltage down to 5 volts and increased the motor voltage to 24 volts
(which is what my motors are rated).
Comments please on the modifications.
Robert
:)
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links