Derek,
Hve you posted them? and where?
Myc
--- derekhawkins <
derekhawkins@...> wrote:
> I bought a milling table from Enco (US) and modified
> it for minimal
> backlash and CNC on X and Y axis. Modified the drill
> press for CNC on
> the Z axis. Using DC geardhead motors retrofitted
> with encoders, a
> servo setup....TurboCNC is the software. Yes, there
> are photos.
>
> --- In Homebrew_PCBs@yahoogroups.com, Mycroft2152
> <mycroft2152@y...>
> wrote:
> > HI Derek,
> >
> > what design for the driller did you use? Any
> photos?
> >
> > I am told that some laser printers will shrink the
> > design slightly in one direction. Haven't had that
> > problem yet, still designing my machine.
> >
> > Myc
> >
> > --- derekhawkins <derekhawkins@y...> wrote:
> >
> > > Hi,
> > >
> > > Just finished putting together a CNC drilling
> > > machine and have now
> > > stumbled on a problem that I never
> > > anticipated....The drilling machine
> > > appears to be more accurate than the printer
> used
> > > for the PCB
> > > artwork....Tried both a HP2420 (laser) and Epson
> > > 2200 (Inkjet) and the
> > > results were similar. Is this a known issue with
> CNC
> > > setups?
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > __________________________________
> > Discover Yahoo!
> > Get on-the-go sports scores, stock quotes, news
> and more. Check it
> out!
> > http://discover.yahoo.com/mobile.html
>
>
>
__________________________________
Discover Yahoo!
Use Yahoo! to plan a weekend, have fun online and more. Check it out!
http://discover.yahoo.com/