I bought a milling table from Enco (US) and modified it for minimal
backlash and CNC on X and Y axis. Modified the drill press for CNC on
the Z axis. Using DC geardhead motors retrofitted with encoders, a
servo setup....TurboCNC is the software. Yes, there are photos.
--- In
Homebrew_PCBs@yahoogroups.com, Mycroft2152 <mycroft2152@y...>
wrote:
> HI Derek,
>
> what design for the driller did you use? Any photos?
>
> I am told that some laser printers will shrink the
> design slightly in one direction. Haven't had that
> problem yet, still designing my machine.
>
> Myc
>
> --- derekhawkins <derekhawkins@y...> wrote:
>
> > Hi,
> >
> > Just finished putting together a CNC drilling
> > machine and have now
> > stumbled on a problem that I never
> > anticipated....The drilling machine
> > appears to be more accurate than the printer used
> > for the PCB
> > artwork....Tried both a HP2420 (laser) and Epson
> > 2200 (Inkjet) and the
> > results were similar. Is this a known issue with CNC
> > setups?
> >
> >
> >
> >
> >
> >
>
>
>
>
> __________________________________
> Discover Yahoo!
> Get on-the-go sports scores, stock quotes, news and more. Check it
out!
> http://discover.yahoo.com/mobile.html