I have blank pcbs, board drill bits and parts ordered and on the way,
before they arrive I would like to check the following:
Let me see if I have this right:
Phase One:
1) I layout the board in the software
FREEPCB found at FREEPCB.COM
2) I print what I just laid out onto
my HP DeskJet 712c printer
2a) I make a copy with
my Panasonic KX-FM106
"Copier/Fax" machine.
3) I turn the copied paper upside down on the blank copper
4) I apply my preheated iron to the backside of the paper
(the paper should stick well or apply more heat)
5) I remove the paper in hot water or something
Phase Two:
6) Now I use the etchant process and remove
the still visible copper from the board
7) Now I remove the ink from the remaining copper
8) Now I drill holes in the board for the components
Phase Three:
9) Insert components and build board.
----------------------------
----------------------------
Well how'd I do? Hope I got it all straight :0)
7&3 fer nw,
KE5CTY (old calls WB5ZQU - WY5L)
http://www.qsl.net/ke5cty/Code may be dying but the pioneering spirit that put the code there in
the first place is still going strong.