mycroft2152 wrote:
> The H100, a 4 inch wide laminator for $60 works well too.
>
> In fact there is a 'hobby' version of the H200 that is under $50 (9"
> wide) that Pulsar is now selling instead of the H200. No mods are
> needed, if using the 1/64" pcbs. Staples Has (had) them.
>
> Myc
>
That's the $50 one I got from Staples. It was ok with 5-6 passes etc, really
needed a few more. 15 minutes heat up time, can't imagine that the H200 isn't
much better. With the mods to slow it down etc, it may be ok.
For manufacturing economy, it could even use the same rollers and heater of
the H200, and be tuned down to seperate the models on purpose. Might be
moddable to be the same thing while one is in there screwing with the gears.
Still, it's going back and a fuser unit is being made..
Alan