Hi,
The blade is 1/8" thick or so, I consider it a bit too wide. By cutting at
45deg with only the tip of one edge, I don't have to cut deep, less dust,
faster cut, clean edge along the copper surface. I just pass it quickly on
the sander to get a nice finish.
Mine is basically identical to the one featured in the pic, with a plastic
bin under the saw for the water. It is a bit heavy, I bought mine at
Canadian Tire on sale. Little noise too.
Robert
:)
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de Radra
Envoyé : mai 13 2005 12:14
À :
Homebrew_PCBs@yahoogroups.comObjet : Re: RE : [Homebrew_PCBs] Saw for PCBs
Robert,
Why do you make cuts on both sides of the PCB instead of only making a
single cut thru the entire PCB? Does this saw have an built-in water feed?
By the way, I see similar tile saws on eBay for less but they add $30
shipping.
Lyman
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs Yahoo! Groups Links