I will also mention that there is a silicone coated
baking paper called Exopap. It is rather pricey. Anyone know a
really serious cook or chef?
Here is a site
<
http://www.culinarycookware.com/catalog.asp?catid=4400&prodid=73200>
--- In
Homebrew_PCBs@yahoogroups.com, "javaguy11111"
<javaguy11111@y...> wrote:
>
> I do have some laser printer labels and had thought of the backer
> sheet. However I was not sure if it was silicone or maybe some kind
of
> wax.
>
> In doing some searching I did also see references to silicone coated
> paper being sold by places that sell transfer sheets for things like
> t-shirts and cups.
>
> It makes me wonder why the usual PCB toner transfer venders are not
> selling something similar. The PNP Blue that I normally use does not
> appear to be silicone based.
>
>
> --- In Homebrew_PCBs@yahoogroups.com, uhmgawa <uhmgawa@m...> wrote:
> > javaguy11111 wrote:
> >
> > > My results were not as good as Stefan's. First the coating did
not
> > > come out as smooth as I would like to have seen it.
> >
> > Likely due to the texture of the paper acting to self-level
> > the silicone film. The paper is also much more compressible
> > than the transparency film which compensates for irregularities
> > in both the knife and surface upon which the film/paper rests.
> >
> > I have heard of success using printer label backer sheet for
> > this same purpose. Is there some reason this is not a
> > viable solution? It would seem quite cost effective.
> >
> >
> > --
> > uhmgawa@m... www.gnu.org