In message <
12d.538c37ab.2f148df2@...>
JanRwl@... wrote:
> Tom: Eyelets. Google "International Eyelets". A pain in the gluteous,
> but aside from PTH, just about the ONLY way, if you can't see the solder-pads
> on top!
There's also the Multicore Copperset system - IIRC there was some info on
improvising tools for it on <
http://www.electricstuff.co.uk/>. Basically, you
need a center-punch, a lump of metal to serve as an "anvil", a bunch of
0.85mm drill bits and a mechanical pencil to dispense the rivets.
Later.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem@... | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.me.uk/ | 48xCD, ARCINv6c IDE, SCSI
... A pound of puppies; a college of cardinals; a bowl of weevils