--- In
Homebrew_PCBs@yahoogroups.com, Stephen Bartlett <tower.op@v...>
wrote:
> Many thanks to everyone who responded.
>
> As I cleaned the board, I had no beading of water when done; it sheeted
> off like it was oil-free. The board as I received it seemed to have a
> waxy coating, reminiscent of dried cosmolene. I think I got all that
> off.
>
> I will use lacquer thinner or acetone outdoors, with suitable skin and
> lung protection.
>
> I will visit a few local copy centers this afternoon and see what I can
> find in the way of laser copiers that will apply a more apparently heavy
> layer of toner than I got originally.
>
> Re: Gary's question, "Are u waiting till the toner dries again
> and board cools before removing the paper??"
>
> Neither the paper of the toner ever "stuck" to the board, although I did
> manage to apply a visible image over about 80% of the traces.
>
> So,
>
> Try a different copier(s)
>
> Use lacquer thinner or acetone, not lighter fluid.
>
I use acetone. It works incredibly well.
I'd look at the printer that you used. Do you know the model number?
Is it really toner based and not an inkjet? Your experience sounds
like what happened when I got an inkjet copy of my artwork mixed up
with the toner based copy (I print on a hi-res inkjet and use a copier
for the toner). It sort of transfered a faint image. I suggest you
stick to monochrome laser printers or copiers.
Keep at it, it is very satisfying the first time you peel off the
paper to find your artwork on copper.