Phil wrote:
>--- In Homebrew_PCBs@yahoogroups.com, David P Harris <dpharris@t...>
>wrote:
>
>
>>Hi Earl-
>>
>>Harbor Freight has a 8 inch mini shear that looks good for $115US at
>><http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90757>
>>
>>
>>
>
>I looked at that one and the grizzly sheet metal shears. They dont
>have a bar that clamps the item being sheered flat. They call it a
>positioning plate though it acts more like a clamp that engages about
>1/2" before the shear starts to cut. The 12" griz as well as my 30"
>has one and it really helps to get a clean, accurate cut. I'm not
>sure how you keep the material flat on the other ones - I'd want to
>rig up some sort of clamping system.
>
>By the way, I made a little fence for mine so I can align the boards
>for a right angle cut. What ever you get, you will probably want to
>do that too.
>
>
Yes, the Grizzly 12" unit looks like a winner for occasional use - comes
with a Hold-down, and a right-angle attachment.
As a bonus, it also does Pressing, Braking, and Rolling!
Of course, as soon as I got it, I would realize I needed the 30" one :-(
David