I'll buy half (250) and split the cost with you.
Larry Taylor KF6JBG
----- Original Message -----
From: grantfair2001
To: Homebrew_PCBs@yahoogroups.com
Sent: Saturday, October 09, 2004 6:27 PM
Subject: [Homebrew_PCBs] Re: Help me find eyelets
Apparently Mouser sells them for $26 for 500. You can get one type for
10 cents per from Far Circuits: "EYLETS .055 OD .042 ID FOR DOUBLE
SIDED BOARD THRU HOLES $0.10 EACH; OR YOU CAN BUY DIRECT FROM MOUSER
AT $26.00 FOR A PACKAGE OF 500."
http://www.farcircuits.net/misc1.htm
info is a bottom of page.
I haven't tried these, but Far Circuits is a ham who sells many
ham-related PCB's at a very reasonable rate IMO. I assume he would
know what works well. I have no connection to them.
Grant
--- In Homebrew_PCBs@yahoogroups.com, "dave_needle" <dave@d...> wrote:
>
>
> I make many PCBs at home, using copper eyelets at the method for
> thru-holes. I used to buy them from Pulsar (formerly DynaArt), but
> they no longer sell them. They sent me to their supplier, but the
> price is now way too high.
> Does someone know where to get the copper eyelets, or does someone
> know a good quality alternative?
>
> Thanks
>
> dave
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Homebrew_PCBs/
b.. To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]