Thanks John
I am aware of the "fill" but as I am an eagle rookie i have not found
the way to display fill on the screen.
I tend to do a lot of rectangles - ends up looking like an SMD board
I figure for the slow speed stuff I do tieing rectangles to either
rail is ok.
I touch up and enhance large areas with shellac(sic?) mixed a little
thicker.
D
--- In Homebrew_PCBs@yahoogroups.com, "crankorgan" <john@k...> wrote:
>
> With the Eagle program you can FILL the ground plane around the
> traces. Hans told us how many messages back. I used this method on
my
> Piker board. All ground points are the same large trace. Very little
> etching required. Done correctly there are no ground loops.
>
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "daveismissing"
> <shootme007@h...> wrote:
> >
> > Why isn't all this software done the other way 'round?
> > I really just want to define how much space I want between
traces.
> > I want all the rest to be trace.
> > Less etchant, no erosion issues, easier for TT etc....
> > crazy?