Hi Thomas,
My posting was meant to open a discussion in order to avoid making films or
other transparencies.
Of course, multiple UV LEDs will do the job, with suitable summing optics.
Unfortunately I live in Romania, where is very hard to find UV leds or
lasers. Optics, cheap, to allow experimenting, NO way.
E-bay is there, but no PalPay for Romania, so.....
The medium monthly salary here is $150, so everything is expensive for us.
We have to go straight to the target, no funds for experimenting.
What remains for me is to initiate a discussion hoping someone there, with
more possibilities....
Cristian
Hi Christian
> Calculations:
> Photoresist needs maximum 100mJ/sqcm, that means 4 seconds/sqcm with
> 25mW laser.
mW/sqcm =mJ
> That means 240 seconds for 100x60mm. Four minutes of XY Plotter work.
> If my calculations are correct, that is not too much.
> Cristian
----------
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.733 / Virus Database: 487 - Release Date: 02/08/04
[Non-text portions of this message have been removed]