Hi Derek,
I did a quick search for PcLogic, got a .dk, do you have a URL? Or is
it just in French/German?
Alan KM6VV
High Tech wrote:
>
> I didn't find Eagle that user friendly but that was a few version back. I
> will give it a shot again but the French program and the PcLogic, which I
> purchased, are simple to use and generate very good boards. Both have Gerber
> 274x for sending in if you want someone else to make your board.
>
> One of the nice features of PcLogic is you can throw some pads down in the
> middle of your drawing.Then you can draw the outline of the part and with a
> few clicks make that a part and name it. For $25 you can't beat it for the
> lite version if you don't need autorouter.
>
> The French program is for people getting started and need something simple
> and free. Everyone knows where the File is at the top, all windows programs
> are the same in general and numbers are numbers a Lm339 is a Lm339 in
> French.
>
> Derek
>
> -----Original Message-----
> From: Alan Marconett KM6VV [mailto:KM6VV@...]
> Sent: Wednesday, January 09, 2002 11:44 AM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] New file uploaded to Homebrew_PCBs
>
> Hi Derek,
>
> For English, why not just use Eagle? There are board size restrictions.
>
> Alan KM6VV
>
> High Tech wrote:
> >
> > Here is the manual us English speaking people have to use the Babel fish
> to
> > convert it.
> > http://etronics.free.fr/dossiers/softs/soft03.htm
> > Babel fish web trans:
> > http://world.altavista.com/tr
> > Derek
> > -----Original Message-----
> > From: High Tech [mailto:hightechsystems@...]
> > Sent: Tuesday, January 08, 2002 9:47 PM
> > To: Homebrew_PCBs@yahoogroups.com
> > Subject: RE: [Homebrew_PCBs] New file uploaded to Homebrew_PCBs
> >
> > Steve
> > The web link is in the bookmarks. It is Freeware from the author Bruno
> > Urbani's web site
> > http://b.urbani.free.fr/
> >
> > Derek