This means that the media (paper, CD etc) feed through the printer without
bending. This allows for rigid objects such as CDs and maybe PCB blanks to
pass through the printer.
Scott
----- Original Message -----
From: <dg140@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, May 29, 2002 9:39 PM
Subject: Re: [Homebrew_PCBs] Laser verses Inkjet
> Hi Scott. What is meant by straight through path?
>
> thanks,
> Charles
>
> --
>
>
> >Don't know, but, Epson is releasing a new printer with a straight through
> >path, 1440 dpi and can accept media up to 1.5 mm thick. Perhaps there is
a
> >way to apply etch resist directly to the board.
> >
> >----- Original Message -----
> >From: <dg140@...>
> >To: <Homebrew_PCBs@yahoogroups.com>
> >Sent: Tuesday, May 28, 2002 10:08 PM
> >Subject: [Homebrew_PCBs] Laser verses Inkjet
> >
> >
> >> What is the general consensus; is a Laserjet, or Injket better for
> >> photoetching? If laser printing is clearer, it also has the danger of
> >> melting the overlay (if plastic is used), yes?
> >>
> >> Charles
> >>
> >>
> >>
> >> Be sure to visit the group home and check for new Bookmarks and files:
> >> http://groups.yahoo.com/group/Homebrew_PCBs
> >>
> >> To unsubscribe from this group, send an email to:
> >> Homebrew_PCBs-unsubscribe@yahoogroups.com
> >>
> >>
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >
> >
> >
> >Be sure to visit the group home and check for new Bookmarks and files:
> >http://groups.yahoo.com/group/Homebrew_PCBs
> >
> >To unsubscribe from this group, send an email to:
> >Homebrew_PCBs-unsubscribe@yahoogroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>