Hi Scott. What is meant by straight through path?
thanks,
Charles
--
>Don't know, but, Epson is releasing a new printer with a straight through
>path, 1440 dpi and can accept media up to 1.5 mm thick. Perhaps there is a
>way to apply etch resist directly to the board.
>
>----- Original Message -----
>From: <dg140@...>
>To: <Homebrew_PCBs@yahoogroups.com>
>Sent: Tuesday, May 28, 2002 10:08 PM
>Subject: [Homebrew_PCBs] Laser verses Inkjet
>
>
>> What is the general consensus; is a Laserjet, or Injket better for
>> photoetching? If laser printing is clearer, it also has the danger of
>> melting the overlay (if plastic is used), yes?
>>
>> Charles
>>
>>
>>
>> Be sure to visit the group home and check for new Bookmarks and files:
>> http://groups.yahoo.com/group/Homebrew_PCBs
>>
>> To unsubscribe from this group, send an email to:
>> Homebrew_PCBs-unsubscribe@yahoogroups.com
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>
>
>
>Be sure to visit the group home and check for new Bookmarks and files:
>http://groups.yahoo.com/group/Homebrew_PCBs
>
>To unsubscribe from this group, send an email to:
>Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>