At 12:41 PM 5/28/02 -0400,
JanRwl@... wrote:
>I respect the need to keep "ON TOPIC", and the pain it can be for a LONG
>message to appear, in which only a small % may have interest, even IF
>well-ON-topic. But this particular drill-routing topic has made me wonder:
>Would members like to read a little "article" about how I applied an
>"aircraft instrument motor" designed to run on 115 V/400 Hz. (yes!), 95
>Watts, to make a 12,000 RPM drill-quill? WAS a project, but the result is an
>amazingly-reliable, precision "drilling instrument", with NO air!
I am not the list owner but as far as I can tell, if it relates to or aids
in making home-brew PC boards, post away! Do give it descriptive subject,
though.
dwayne
--
Dwayne Reid <
dwayner@...>
Trinity Electronics Systems Ltd Edmonton, AB, CANADA
(780) 489-3199 voice (780) 487-6397 fax
Celebrating 18 years of Engineering Innovation (1984 - 2002)
.-. .-. .-. .-. .-. .-. .-. .-. .-. .-
`-' `-' `-' `-' `-' `-' `-' `-' `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.