Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] making vias (was: Re: Plating thruholes.)

From: "Stefan Trethan" <stefan_trethan@...>
Date: 2004-08-20

> Thought I would mention...again...the possibility of using pin headers
> on the ∗edge∗ of the board. No need to drill holes or worry about
> soldering pins on both sides. Here's an illustration:
> http://macetech.com/edgeheader.jpg
>

by the way that works really well with sub-d connectors.
(the solder-lug type, 1.5mm PCBs are a snug fit).
Ideal for small circuits like pic programmers and such.
If it is small enough the pcb will fit in the plug housing.

ST