Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Re: Toner transfer of component legend

From: Stefan Trethan <stefan_trethan@...>
Date: 2004-07-09

> it must be aligned at the edge of the PCB, as the toner shrinks the
> paper.
> If i have holes in the center previously aligned they will be pulled off
> as soon
> as the LE is fed. I think a toner line at the pcb edge will do the trick.
>
>
> ST

make that as the heat in the fuser shrinks the paper.
Possibly running it through previously to shrink it might help.

ST