On Fri, 9 Jul 2004 00:56:58 +1000, Don Bradbury <
don282@...> wrote:
> Hi Stefan, I am pretty new to this group , the legend looks fine but
> what
> do you do to the copper it looks like it has been attacked with
> sandpaper,
> is this what is needed to get the toner to stick?. I always prepare my
> board
> with steel wool and then scotchbrite and I never get marks like that. I
> am
> afraid if that is what is needed I will stick to PRP. 15 thou. Teflon
> board
> is to expensive here to do that to(AU 1.50 a sq.inch)
> Regards Don.....VK3YV
The marks look very dramatic on the scan, this is the light from the
scanner, in real
life you can hardly see any scratches.
I use 600grit paper, it really isn't as bad.
I have steel wool but i like the paper more...
The cleaning is much more important than sanding (IPA works well).
well, i'm off drilling that board..
ST