--- In
Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
> doing small series really speeds up the learning curve...
>
> i tried 1 run through the fuser -> 2 small errors where the toner
didn't
> stick.
>
> later i remembered i used laquer thinner instead of denatuerd
alcohol to
> clean this time.
>
> so i made the 3rd board with denatured alcohol cleaning again and 1
run,
> -> no errors.
I have found that the slightest fingerprint on the surface will
prevent a good transfer.
Dave