On Mon, 24 May 2004 17:05:41 +0200, Stefan Trethan <
stefan_trethan@...>
wrote:
> Hi all,
>
> have fetched the printer.
>
> Have problems installing, anyone knowing how to make a Epson Stylus PRO
> (no number)
> working with xp?
>
> A few nozzles seem clogged, but some colors are 100% OK so i could use
> it to try direct inkjet printing on aluminium foil.
>
> But i can't get it to receive any data from the pc.
>
> ST
>
Damn it that ∗%&&((/&$$ printer does not work!
i have tried with win3.11 and the driver does not work there too.
I'm rather sure it is a hardware fault, as i would expect
the printer to light this data led if i send something through the dos
console.
It also has a 8-pin mini din serial connector.
I will try this.
the clean cartridge and print fonts / test head works, so i do not really
understand
why the normal printing doesn't....
I had a very hard time getting that case apart (wanted to look if i see
something oddd...
Brute force was required ;-).
It would be a good printer for flatbed conversion.
ST