Okay, thanks.
BTW, I have been using the "cheap glossy photo paper and a clothes iron"
method with fair results using 0.024 widths. I'll be trying the
"magazine paper in a laminator" method on a couple of designs. I'll post
my results in a week or so.
mickeym
Stefan Trethan wrote:
>On Sat, 22 May 2004 13:40:14 -0400, mickeym <whitemouse@...>
>wrote:
>
>
>
>>I took a swing at entering the "http://sanisis.netfirms.com/" schematic
>>in Eagle format.
>>I changed only the extra junction at pin 8 of the PIC, and just put test
>>pads for the battery and the RX433 module, and used through-hole parts.
>>
>>mickeym
>>
>>
>>
>
>Mickey, I hoped Karega would post here that the work is already assigned,
>but
>this isn't the case so i have to do it.
>
>There were a changes to the schematic, and the work on the pcb is already
>in pogress.
>
>You need not waste your time.
>
>ST
>
>
>