On Sat, 22 May 2004 13:40:14 -0400, mickeym <
whitemouse@...>
wrote:
>
> I took a swing at entering the "http://sanisis.netfirms.com/" schematic
> in Eagle format.
> I changed only the extra junction at pin 8 of the PIC, and just put test
> pads for the battery and the RX433 module, and used through-hole parts.
>
> mickeym
>
Mickey, I hoped Karega would post here that the work is already assigned,
but
this isn't the case so i have to do it.
There were a changes to the schematic, and the work on the pcb is already
in pogress.
You need not waste your time.
ST