Here is a successful layout, this images highlights the power in blue.
Download the entire set of artwork and you can get a better idea from
it...
http://hans-w.com/powerlines.jpghansw
crankorgan wrote:
> John,
> Keep the traces that come out of the L298 to the motor
> as fat and short as you can. Also the pins that go to the sense
> resistors to ground. Also the pin that supplies the plus motor voltage
>
> to the L298. The rest can be thin.
>
>
> John
>
>
>
>
>
>
>
>
>
>
>
> --- In Homebrew_PCBs@y..., "marble_h" <marble_h@y...> wrote:
> > is there a set thickness when doing a trace is .050 to small or
> does
> > it matter.On the board I just did ,I made most at .125 and the
> > smallest is .050 is that ok I have not finnished the board but I
> will
> > post it tonight I still have to but in all the dill holes but let
> me
> > know what you guys think of it so far .
> >
> >
> > John Brauweiler
>
>
> Yahoo! Groups Sponsor
ADVERTISEMENT
[Image]
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]