Hi Dave,
Do you have an item number or anything. I searched on 'Precise Cut' and
several other combinations but nothing came up.
--
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/ > -----Original Message-----
> From: Dave Mucha [mailto:dave_mucha@...]
> Sent: Friday, May 07, 2004 5:55 AM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: [Homebrew_PCBs] t-tech and Precise Cut on E-Bay
>
>
> Hi all,
>
> in case you are interested, there is a Precise Cut unit on E-Bay
> without the driver electronics.
>
>
> There is also a sample board they cut. On the upper large pad, it is
> not completely round. ditto for the lower pad.
>
> Also, some of the square pads, the trace enters the pad a little too
> deeply.
>
> Although it is not perfect, you can see it makes a very useable
> board. As many of these will.
>
> It also shows the need for the additional ring traces on pads as
> since that is where you solder, you need to be careful with a small
> isolation.
>
> Maybe I'll do a similar board with my machine to show some of the
> features I like to use.
>
> Dave