Hello again,
Forgot to add. If you do go look at those machines (or the
superscribe at Microkinetics, or Larkens 1515), ignore the price.
What I have in mind will blow those prices out of the water...
probably off the Earth<G>
Ballendo
--- In
Homebrew_PCBs@yahoogroups.com, "ballendo" <ballendo@y...>
wrote:
> Jeremy,
>
> The milinst machine is NOWHERE NEAR what I'm planning. It's a toy.
>
> Look up T-tech or LPKF to get an idea of something closer to what
I'm
> asking about...
>
> Ballendo
>
> --- In Homebrew_PCBs@yahoogroups.com, "Jeremy Taylor" <jt@j...>
wrote:
> >
> > I built my own,
> > But
> > For comparison. There is a company in England
> > (http://www.milinst.com/main.htm)
> > , who does just what you are planning. They charge f 249.00
> > But with shipping and conversion to the US make it nearly $600
> >
> > ----- Original Message -----
> > From: "ballendo" <ballendo@y...>
> > To: <Homebrew_PCBs@yahoogroups.com>
> > Sent: Friday, March 12, 2004 5:34 PM
> > Subject: [Homebrew_PCBs] What would you pay for a cnc pcb
> mill/drill kit?
> >
> >
> > > Hello,
> > >
> > > This was buried at the bottom of the pick and place post, and I
> > > realised many may just skip over that topic...
> > >
> > > What would you be willing to pay for a cnc machine kit that
> > > assembles like a bookcase(meaning rather quickly--an hour or
two--
> ,
> > > with limited tools), was 12" x12" (or 12"x18") in work area, and
> > > could be used as a pcb drill, solder paste dispenser, enclosure
> > > cutout and panel engraving, vinyl cutting, pcb milling. The kit
> would
> > > be complete, with software and drives and motors included, and
> just
> > > needing plugged together.
> > >
> > > Is this something any of you would be interested in buying? At
> what
> > > price? Speed will be at least 48IPM, and if the price merits, it
> > > could be as high as 200IPM, with 90IPM a "reasonable" mid level.
> > >
> > > What about a different machine? Smaller, and aimed more
squarely
> at
> > > drilling and milling pcbs? Say 6"x12" area, and slower too, at
> about
> > > 36IPM. Still a simply assembled(screwdriver, hex wrench) kit,
> > > complete with s/w, motors, cables and drives. What would be
> a "fair"
> > > price? (That you would be willing to pay!)
> > >
> > > Thank you in advance,
> > >
> > > Ballendo
> > >
> > > P.S. A different question: If low price were the most important
> > > thing, what is the SMALLEST travel size (6"x8"?) and SLOWEST
> traverse
> > > rate, that you would find acceptable?
> > >
> > >
> > >
> > >
> > >
> > >
> > > Be sure to visit the group home and check for new Bookmarks and
> files:
> > > http://groups.yahoo.com/group/Homebrew_PCBs
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >