> As for WD-40, speaking as an electronics tech: Don't do it! WD-40 and
> electronics do -not- mix. WD-40 is -not- an oil. It's volatile, which
> means heat is going to cause it to evaporate anyway. It's main use is
> as a water displacer. My father destroyed the hinges on a truck of
> mine, because unknown to me he was spraying all the hinges on my truck
> with WD-40 every time I visited. I couldn't figure out why my doors
> kept squeeking and sticking, I'd grease them, and in a short time
> they'd stick again. He'd hosed out all the grease with WD-40 and
> within a short time all the WD-40 had evaporated, leaving nothing but
> metal to metal contact with some dust thrown in.
>
we all have read it, and experienced it a hundred times now (ok, almost
all).
WD40 is only good to lubruicate the dust bin!
throw it away and get somthing useable.
there are mighty good lubricants (also in spray cans) out there, more
expensive of course. for most applications a simple thin oil or grease is
worlds better
than a liter of WD40.
what is it good for as a water displacer? it vanishes after some time and
the
water comes back... for loosening rusty screws there are also better
quality sprays.
There should be a law for a warning label on WD40...
ST