I am relatively new to this group and apologise if this possibility has been
mentioned previously. Some 10 years ago, a group of local amateur radio
operators, all working in a Government communications laboratory, were
having considerable success in printing PCB patterns directly onto the
copper, using the ink used to print logos, slogans etc on to T-shirts. They
put the ink into the pens of the old flat-bed plotters. The laboratory has
long since closed and the group dispersed, so I cannot now follow that idea
up. Has anybody in this group tried T-shirt ink in an inkjet printer?
Bill
----- Original Message -----
From: "Stefan Trethan" <stefan_trethan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, March 08, 2004 2:50 AM
Subject: Re: [Homebrew_PCBs] Re: Standard inkjet inks for etch resist?
>
> >
> > I'm new here, but I have to ask... has anyone tried using Future?
> > It's a thin acrylic "paint", not a wax. It can be thinned with water
> > or alcohol. It can be colored with food coloring and presumably
> > inkjet ink. And it dissolves with ammonia or simple Windex.
> >
> > In other countries, a similar product is called Johnson's Klear, or
> > variations on that name.
> >
> >
>
> "Bona Parkett polish" is the same, i have tried it with a bubblejet and
> it didn't work.
> i expect better results from piezo.
>
> ST
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
> Yahoo! Groups Links
>
>
>
>
>