hey---this looks promising,i bought some MOP&GLOW,
which has some teflon in it. info on the container
states that it can be cleaned off the board(or floor)
with lysol and ammonia, 1 cup each to 1/2 gallon of
water.
I put a small dot on a pcb and it spread a small
amount but it dryed hard, tryed to remove it by
scraping with a screw driver, it came off but not
easy, i had not cleaned the board and it adhered to
it.looks like its time to emty an ink carterdge and
refill with mimwax. may have to add a small amt of red
food dye containing alcohol to the mimwax.
mebo
--- Steve <
alienrelics@...> wrote:
> --- In Homebrew_PCBs@yahoogroups.com, "Jeremy
> Taylor" <jt@j...> wrote:
> > Although I'm not interested in this technology,
> I'd thought I'd drop a
> > teaser
> > Minwax polycrylic is a water soluble polymer, It's
> thin-able with
> water, and
> > dries to a chemically resistant and VERY hard
> surface.
> > The only possible problems I see with it as an
> etch resist, are 1:
> it may
> > not adhere to copper, and two if it does, you
> might not ever get it off.
> >
> > JT
> >
>
> Oohh! There are two from Minwax:
>
>
http://www.minwax.com/products/protective/polycrylic.cfm >
>
http://www.minwax.com/products/protective/floor-poly.cfm >
> Steve
>
>
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you�re looking for faster
http://search.yahoo.com