--- In
Homebrew_PCBs@yahoogroups.com, "gmanca101" <gmanca101@y...>
wrote:
> Basically, the silicon mold is by Alumlite/Dow Corning. You see,
> Alumlite purchases the Dow Corning MS III RTV Rubber compound and
> then repackages it into consumer-friendly quanities. Here is there
> website: http://www.alumilite.com/.
>
> As for the liquid plastic itself, I am using a liquid resin
compound
> from TAP Plastic called, "Fast Casting Liquid Resin". Their site is
> here:
>
> You can purchase the items from the appropriate websites or you can
> purchase the liquid plastic from your local TAP Plastic store and
the
> RTV Compound may(may) be purchased from a hobby shop. Also note
that
> Alumilite sells a liquid plastic compound but the cost is much more
> then TAP Plastic's.
>
Thanks a lot for the info
-Josh