I don't know, you should join and ask. ;')
http://groups.yahoo.com/group/Homebrew_PCBs/I've used whatever Radio Shack sells and found at best
it is adequate, at worst a waste of money and time.
I've also used some dry stuff I think was Ammonium
Persulfate that I was satisfied with.
A colleague told me he's used a weak Nitric Acid mix
to etch boards -very- quickly but you have to be well
rested, have a lot of ventilation and really be paying
attention. And your etch resist coating had better be
complete.
Steve Greenfield
--- Tesla list <
tesla@...> wrote:
> Original poster: "Malcolm Watts by way of Terry
> Fritz <twftesla@...>" <m.j.watts@...>
>
> Hi Steve,
> What etching fluids are used by your
> group members?
>
> Regards,
> Malcolm
>
> On 6 Dec 2001, at 8:03, Tesla list wrote:
>
> > Original poster: "Steve Greenfield by way of Terry
> Fritz
> <twftesla@...>" <alienrelics@...>
> >
> > I've started a Yahoo Group on making, etching,
> > soldering printed circuit boards yourself.
__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at
http://shopping.yahoo.comor bid at
http://auctions.yahoo.com