So the offset of the board thickness does not cause a slight misalignment?
----- Original Message -----
From: "Tony Mattioli" <tmattioli@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, January 18, 2004 10:21 PM
Subject: [Homebrew_PCBs] Re: Laminating and alignment
> I use the method described above of holding the two sides up to the
> light to align them. I attach the two sides with a glue stick.
> This holds them well and doesn't interfere with the laminator.
> Works perfectly every time. I've never had a misalignment.
> Tony
>
> --- In Homebrew_PCBs@yahoogroups.com, "dkesterline"
> <desterline@t...> wrote:
> > Looking for other peoples experiance with aligning double sided TT
> > through a laminator.
> >
> > I just tried to laminate my first DS board. I stuck down one side,
> > removed the paper so I could drill a couple alignment holes and
> tried
> > laminating the other side. Totaly destroyed the toner on the first
> > side.
> >
> > So what do other people do?
> >
> > -Denny
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Homebrew_PCBs/
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>