No, even the paper does not stick to the board, I've set the
temperature and finally the copper change color and a little bit of
toner stick to the copper but not all. I use HP laser jet 2200D and
I think the toner from this printer is not suitable for toner
transfer. May be I need to try another printer, but very hard for me
to look for another one...
--- In
Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
> On Sat, 10 Jan 2004 09:33:39 -0000, tnk <tnk11@y...> wrote:
>
> > same for me also, the toner just refuse to stick to the copper,
(I use
> > cloth iron) Seem like I need the correct timing and temperature
and
> > transfer paper. So far never been successful with this toner
transfer
> > method :(
> >
>
> DOes the iron melt the toner (try transfering it to a second sheet
of
> paper).
>
> If the sheets don't stick together somethig is wrong.
>
> maybe too cold iron.
>
> maybe "fuser oil" used.
>
> if the paper sticks, then maybe the board cleaning is not ok...
>
> Stefan