It opened just fine for me in Vector. I am on build 9.3.050
I will e-mail you the file in Vector format off list.
Tim
[Denver, CO]
> -----Original Message-----
> From: Alan Marconett KM6VV [mailto:KM6VV@...]
> Sent: Wednesday, April 17, 2002 9:00 PM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] DXF file of PCB
>
>
> Hi John,
>
> Just downloaded titfortat. Vector CAD/CAM didn't like it.
> Intellicad and FlashCut crashed. Thoughts? I'll have to get
> to another machine to try TurboCad.
>
> Alan KM6VV
>
> crankorgan wrote:
> >
> > Hi All,
> > I just uploaded a small PCBoard I did in TurboCad.
> It is a pure
> > DXF that can be imported into KCam or other GCODE
> converters. If you
> > import the file into KCam you will see my milling method. I
> go around
> > and overlap each trace. You will also see the dots that
> cause the mill
> > to pre-drill holes. The file is a TRACE of my artwork. After I draw
> > the PCBoard outline file. I trace it in an efficent mannor.
> This cuts
> > down milling time. That PCB take 40 minutes at 6" per minute.
> >
> > John
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Buy Stock for $4 and no minimums.
> FREE Money 2002.
> http://us.click.yahoo.com/k6cvND/n97DAA/ySSFAA> /bGYolB/TM
>
>
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>